MOZ7 HD FPV Drone with DJI O3 Air Unit, H-frame Design, Heat Sink, and Long-Range Kit.
Introduction:
The MOZ7 model of the Starship series under GEPRC is officially released. It continues the design concept of traditional models while adding personalized protection side panels. The detailed enhancements of various mechanical textures make the entire machine more nautical and industrial.
The personalized design also retains high compatibility, with a maximum support of 30.5mm×30.5mm for the installation of the flight controller tower, and it can be compatible with the installation of various video transmitters and customized heat sinks for them, with remarkable heat dissipation effects. The innovative lens fixing method allows the alternating left and right lens aluminum part installation positions to achieve the switching of 19mm and 20mm sizes; the camera – fixed printed parts are reinforced with carbon plates, making the installation force more uniform and avoiding wing deformation during installation and flight. It uses the TAKER F722 BT BC V3 flight controller, which has high performance and multiple redundant ports, and supports Bluetooth wireless parameter adjustment. The 2809 motor is paired with HQ7.53.73 propellers for powerful and smooth flight, and it is equipped with GEP – M10 – DQ GPS to escort your long – distance flight. The front – mounted receiver antenna avoids the loss of signal of the body – mounted receiving antenna due to mid – air turns.
Using the GEP – VT6 – 6000mAh battery, the single – machine endurance is 30 minutes, and with a Gopro10 mounted, the endurance is 20 minutes. Choosing the DJI O3 version for internal recording supports a maximum of 4K 120FPS, meeting your daily shooting needs.
This time, the new series MOZ7 will lead you to break through the limit distance and achieve extraordinary images.
The MOZ7 model of the Starship series under GEPRC is officially released. It continues the design concept of traditional models while adding personalized protection side panels. The detailed enhancements of various mechanical textures make the entire machine more nautical and industrial.
The personalized design also retains high compatibility, with a maximum support of 30.5mm×30.5mm for the installation of the flight controller tower, and it can be compatible with the installation of various video transmitters and customized heat sinks for them, with remarkable heat dissipation effects. The innovative lens fixing method allows the alternating left and right lens aluminum part installation positions to achieve the switching of 19mm and 20mm sizes; the camera – fixed printed parts are reinforced with carbon plates, making the installation force more uniform and avoiding wing deformation during installation and flight. It uses the TAKER F722 BT BC V3 flight controller, which has high performance and multiple redundant ports, and supports Bluetooth wireless parameter adjustment. The 2809 motor is paired with HQ7.53.73 propellers for powerful and smooth flight, and it is equipped with GEP – M10 – DQ GPS to escort your long – distance flight. The front – mounted receiver antenna avoids the loss of signal of the body – mounted receiving antenna due to mid – air turns.
Using the GEP – VT6 – 6000mAh battery, the single – machine endurance is 30 minutes, and with a Gopro10 mounted, the endurance is 20 minutes. Choosing the DJI O3 version for internal recording supports a maximum of 4K 120FPS, meeting your daily shooting needs.
This time, the new series MOZ7 will lead you to break through the limit distance and achieve extraordinary images.
Features:
- The lens adopts CNC aluminum alloy side plates, which are sturdy and durable, and are compatible with the installation of 19mm and 20mm lenses.
- The flight controller has a built – in Bluetooth, allowing wireless connection with mobile phones, convenient and fast parameter adjustment.
- Personalized protection side panels effectively protect the safe operation of internal electronic equipment and improve flight reliability, with a maximum support of 30.5×30.5mm for the flight controller tower and 30×30mm for the video transmitter (external size) installation.
- The high – definition version uses DJI O3 video transmission, with clear FPV images, stable signals, low latency, long – distance transmission, and a maximum support of 4K/120fps recording.
- The H – shaped frame design ensures smooth flight handling, stable posture, and is suitable for long – distance flight.
- The motor hole positions are compatible, supporting the installation of 16×16mm and 19×19mm motors.
- It has a built – in anti – spark module to reduce sparking noise when powering on and extend the service life of electrical equipment.
- Additional video transmitter heat sinks are added to ensure the stable operation of the video transmitter during flight.
- Paired with the GEP – VT6 – 6000mAh battery, the no – load flight time is 30 minutes, and with a Gopro10 mounted, the flight time is 20 minutes.
- It can mount all series of Gopro cameras, Insta 360 Go2, and Caddx Peanut cameras, with stable and clear shooting effects.
Main Parameters:
Chinese product name: MOZ7 High – Definition Video Transmitter FPV Drone
Frame: GEP – MOZ7
Body size: 280mm×310mm
Wheelbase size: 320mm
Top plate thickness: 3.0mm
Bottom plate thickness: 3.0mm
Arm thickness: 6.0mm
Arm splint thickness: 3mm
Camera mount splint thickness: 2.0mm
Video transmitter cover plate thickness: 1.5mm
Flight control system: GEP – F722 – BT – HD V3
MCU: STM32F722
GYRO: 42688 – P(SPI)
Video transmitter: O3 Air Unit / Runcam Link Wasp / Walksnail Avatar V2 / GEPRC RAD 5.8G&1.6W
ESC: GEP – 4N11 ESC BLHeli_32_50A
Propeller: HQ7.53.73
Antenna: momoda 5.8G Antenna
Motor: 2809 – 120KV (6S version)
Chinese product name: MOZ7 High – Definition Video Transmitter FPV Drone
Frame: GEP – MOZ7
Body size: 280mm×310mm
Wheelbase size: 320mm
Top plate thickness: 3.0mm
Bottom plate thickness: 3.0mm
Arm thickness: 6.0mm
Arm splint thickness: 3mm
Camera mount splint thickness: 2.0mm
Video transmitter cover plate thickness: 1.5mm
Flight control system: GEP – F722 – BT – HD V3
MCU: STM32F722
GYRO: 42688 – P(SPI)
Video transmitter: O3 Air Unit / Runcam Link Wasp / Walksnail Avatar V2 / GEPRC RAD 5.8G&1.6W
ESC: GEP – 4N11 ESC BLHeli_32_50A
Propeller: HQ7.53.73
Antenna: momoda 5.8G Antenna
Motor: 2809 – 120KV (6S version)
